Open Water Swimming Wetsuit Australia: 6 Steps to Choose the Right One
Learn how to choose an open water swimming wetsuit in Australia, from water temperature and thickness to fit, rules and what to wear underneath.
Updated November 2026
An open water swimming wetsuit australia swimmers can rely on comes down to three things: the water temperature you swim in, the thickness and cut that match it, and a fit that lets you swim freely without flushing water in. This guide walks through those decisions in order so you can narrow the options quickly. Australian waters range widely, from cool southern bays to warm tropical reefs, so the right choice depends heavily on where and when you swim.
Step 1: Check the Water Temperature Where You Swim
Start with the water, not the wetsuit. Look up typical readings for your beach, lake or harbour across the seasons, since a wetsuit that suits a summer swim in Queensland may be too warm for a winter session in Tasmania. Many swimmers check local surf life saving clubs or the relevant state water authority for current conditions. Treat any figures as guides and confirm on the day.
Shopping for one? See our guide: Best Wetsuit for Open Water Swimming (2026): Which Should You Choose?.
Step 2: Match Thickness to Temperature
Thickness is measured in millimetres and is usually given as two numbers, such as 3/2mm or 5/3mm. The first figure is the torso and the second is the arms and legs. Thinner suits offer more freedom and are generally used for warmer water, while thicker suits add buoyancy and warmth for colder swims. Our guide to Open Water Swimming Wetsuit Thickness: 5 Factors to Get It Right explains how these factors interact in more detail.
Step 3: Decide Between Triathlon and Open Water Cuts
Triathlon suits are built for speed and quick transitions, with shorter sleeves and legs and a lighter feel in the shoulders. Open water suits generally offer more coverage and warmth for longer sessions. If you want help weighing the two, read Open Water vs Triathlon Wetsuit: Which Fits Your Swimming?. Both types should sit snugly without restricting your shoulder rotation.
Step 4: Get the Fit Right
A good wetsuit should feel tight everywhere without causing pain or restricting breathing. Check the following:
- Lift your arms overhead and rotate your shoulders. The suit should not pull hard across the back.
- Squat deeply. The crotch seam should not split or ride up sharply.
- Stand upright. Water should not pool at the neck or wrists when you move.
- Compare the brand’s size chart against your measurements rather than relying on your usual clothing size.
Brands size differently, so always check the manufacturer’s chart before buying.
Step 5: Plan What You Wear Underneath
In colder water, a thin layer under the suit can add warmth, though it can also increase drag and reduce flexibility. Many swimmers test their combination in shallow water before committing to a longer swim. For specific combinations, see Open Water Swimming What to Wear Under Wetsuit: 6 Layers That Work.
Step 6: Confirm the Rules for Your Event
Wetsuit rules vary between pool training, club events, and sanctioned races. Some events set temperature limits under which wetsuits are permitted or banned, and some restrict certain designs. Check the organiser’s published rules well before race day, and if you are unsure, contact them directly.
Practical Checklist Before You Buy
- Typical water temperature for your swim location and season
- Suit thickness matched to that temperature
- Triathlon or open water cut based on your swimming goals
- Fit checked against the manufacturer’s size chart
- Shoulder and squat mobility tested
- Event wetsuit rules confirmed
Common Mistakes
- Buying a suit that feels loose in the store, expecting it to stretch and fit better later.
- Choosing thickness based on air temperature instead of water temperature.
- Skipping a test swim before a long or race-day session.
- Assuming a suit that works in one country’s conditions will suit Australian water unchanged.
- Ignoring event rules until the week of the race.
Recommended Gear
A wetsuit does the most work in cold water, so it helps to add a few supporting items.
- Neoprene-friendly swim cap: Keeps warmth in and protects your head from cold water. View on Amazon
- Anti-fog goggles: Clear vision matters when you are sighting in open water. View on Amazon
- Wetsuit lubricant: Reduces chafing at the neck and wrists during the first few minutes of a swim. View on Amazon
FAQ
How thick should an open water wetsuit be in Australia?
It depends on the water temperature where you swim. Warmer northern waters may suit a thin or no suit, while cooler southern waters often call for a thicker option. Match the thickness to the temperature you expect on the day.
Can I wear a triathlon wetsuit for open water swimming?
Yes, many swimmers do, especially for shorter or faster swims. Triathlon suits usually offer less coverage and warmth than open water suits, so they may suit milder conditions better.
Should a wetsuit feel tight?
It should feel snug, with water kept out at the neck and wrists. It should not restrict breathing or shoulder movement. If you have concerns about fit or any medical issue affecting swimming in cold water, consult a qualified professional.
Conclusion
Choosing an open water swimming wetsuit in Australia is easier when you work in order: check the water temperature, match the thickness, pick the right cut, and confirm the fit. Test your setup in shallow water and check event rules before race day. With those steps done, you can swim comfortably and focus on the session.
Related reading
- Open Water vs Triathlon Wetsuit: Which Fits Your Swimming?
- Open Water Wetsuit Swimming: A Practical Guide (2026)
- Open Water Swimming What to Wear Under Wetsuit: 6 Layers That Work
Ready to choose one?
