We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Maintain Anti Fog Goggles: 6 Steps for Lasting Clear Lenses

Learn how to maintain anti fog goggles with six simple steps covering cleaning, drying, storage and reapplication so your lenses stay clear in the pool or open

Updated November 2026

Learning how to maintain anti fog goggles comes down to keeping the lens coating clean, storing the goggles correctly and reapplying treatment when it wears off. Follow the steps below and your goggles should stay clear for many more sessions. Most fogging problems come from oils, sunscreen residue or a worn coating rather than from the goggles themselves.

Rinse and Clean the Lenses After Every Session

Chlorine, salt, sunscreen and skin oils all break down anti fog coatings over time. Rinse the goggles in cool fresh water as soon as you leave the pool or open water. Then wash the lenses gently with a drop of mild, fragrance-free soap or a dedicated goggle cleaner, using your fingertips rather than a towel or sponge that can scratch the surface.

Shopping for one? See our guide: 7 Best Anti Fogs for Ski Goggles: Expert Picks for Clear Days on the Slopes. If you want more background, see Anti Fog Dive Mask: 5 Best Picks for Clear Reef Viewing (2026).

Dry and Store the Goggles Properly

Moisture trapped in the gasket and strap encourages residue buildup and can stretch the silicone. Shake off excess water, then let the goggles air dry out of direct sunlight, since heat can warp the lenses and degrade the coating. Store them in a ventilated mesh bag or a hard case with the strap loosely set rather than wound tight around the frame.

Avoid the Habits That Strip Anti Fog Coatings

Certain everyday habits wear coatings faster than normal use does. Touching the inside of the lenses with bare fingers transfers oil, which creates patches that fog first. Wiping with paper towels, shirt hems or rough cloth leaves micro-scratches. Cleaning with harsh detergents, alcohol-based products or toothpaste also damages the surface.

Reapply Anti Fog Treatment at the Right Time

Most anti fog coatings are not permanent. Owners often report that lenses start fogging sooner once the treatment has worn thin, usually after a number of sessions or after a deep clean. When you notice fogging returning despite good cleaning, apply a fresh coat of an anti fog spray or drop-on product, following the label directions for dwell time and rinsing. Apply it to dry lenses, spread it evenly, and let it set before putting the goggles on.

A Simple Maintenance Checklist

  1. Rinse goggles in fresh water immediately after each session.
  2. Clean lenses with mild soap or a goggle cleaner using fingertips only.
  3. Shake off water and air dry away from direct sunlight.
  4. Store in a ventilated bag or case with the strap loose.
  5. Reapply anti fog treatment when fogging returns.
  6. Inspect the gasket and strap monthly for cracks or stiffness.

Common Mistakes to Avoid

  • Applying sunscreen before goggles and then touching the lenses.
  • Storing wet goggles in a sealed bag, which traps moisture.
  • Using saliva to clear fog, which leaves residue that encourages fogging.
  • Scrubbing lenses with abrasive pads or the rough side of a sponge.
  • Waiting until goggles are heavily fogged before reapplying treatment.

A dedicated goggle cleaner helps remove oils without stripping the coating, and a fresh anti fog spray restores clarity once the original treatment has faded. Look for a goggle-safe cleaner such as a product designed for swim goggles. View on Amazon

A breathable mesh gear bag keeps goggles dry between sessions and prevents them from being crushed in a swim bag. View on Amazon

FAQ

How often should I reapply anti fog to my goggles?

There is no fixed schedule because wear depends on how often you swim and how you clean the lenses. Reapply when fogging returns despite proper cleaning, which is often a sign the coating has thinned.

Can I use dish soap to clean anti fog goggles?

A small amount of mild, fragrance-free soap is generally fine for occasional cleaning, but avoid harsh degreasers. Check the manufacturer’s care instructions if you are unsure.

Why do my goggles fog up right after I put them on?

Fogging at the start usually means the coating is worn, oily residue is present, or the lenses were touched during application. Clean thoroughly and reapply treatment to fix it.

Conclusion

Maintaining anti fog goggles is mostly about gentle cleaning, careful drying and smart storage. Reapply treatment when clarity starts to slip and avoid the habits that strip coatings. Consistent care keeps your view clear session after session.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our swimming gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Swim Brief.