How to Clean Anti Fog Swim Goggles Without Ruining the Coating
Learn how to clean anti fog swim goggles without stripping the coating. Simple steps, safe materials, and mistakes to avoid for clear pool views.
Updated November 2026
Learning how to clean anti fog swim goggles properly keeps the lens coating working and your view clear from the first lap to the last. The goal is to remove oils, sunscreen, chlorine residue and dust without scrubbing away the anti fog layer. Most of the work takes about five minutes, and the method is the same for tinted, mirrored and clear lenses.
Why Cleaning Affects Anti Fog Performance
Anti fog coatings are thin, and they depend on a smooth, residue-free surface to spread condensation into a uniform film. Skin oils, sunscreen and pool chemicals create spots where water beads up and fogs. Abrasive cleaning, such as rubbing with a towel or using household cleaners, can wear the coating down over time. Gentle, regular cleaning matters more than deep cleaning.
Shopping for one? See our guide: 6 Best Swim Goggles Anti Fogs for Clear Pool Views (2026).
Step-by-Step Cleaning Method
- Rinse the goggles in cool, fresh water right after your session. This removes chlorine or salt before it dries on the lens.
- Apply a small drop of mild, fragrance-free liquid soap, such as a baby shampoo or a gentle dish soap, to each lens with clean fingertips.
- Rub the soap in with your fingers for about 10 seconds per lens. Work from the center outward and include the inner edge where the lens meets the gasket.
- Rinse thoroughly under lukewarm water until no soap film remains. Residual soap can cause streaking.
- Air dry the goggles on a clean towel, lenses facing up. If you dry them with a cloth, use a soft microfiber cloth and pat rather than wipe.
Cleaning the Strap, Gasket and Frame
Dirty straps and gaskets transfer oils back onto the lens every time you put the goggles on. Rinse the strap in fresh water and rub it gently with a drop of soap, then rinse again. Pull the gaskets away from the frame and rinse the inside edge, where sunscreen and hair products tend to collect. Let everything dry fully before storing, because trapped moisture encourages odor and buildup.
Deep Cleaning Once a Month
If you train several times a week, clean the goggles more thoroughly about once a month. Soak the lenses in a bowl of lukewarm water with a small amount of mild soap for five to ten minutes, then rinse and air dry. Avoid alcohol, acetone, window cleaner and any product labeled as an abrasive polish. Manufacturers generally recommend mild soap and water for this kind of cleaning.
Gear Checklist
- Mild, fragrance-free liquid soap
- Lukewarm and cool fresh water
- Soft microfiber cloth
- A clean towel for air drying
- A hard case or breathable pouch for storage
Recommended Gear
- Mild liquid soap: A fragrance-free formula avoids leaving perfume residue that can interfere with the coating. View on Amazon
- Microfiber cloth: Soft fibers dry the lens without scratching it. View on Amazon
- Goggle storage case: A hard case keeps lenses from getting scratched in a gym bag. View on Amazon
Common Mistakes to Avoid
- Wiping the lens dry with a rough towel or your swimsuit, which can scratch the coating.
- Using toothpaste, household glass cleaner or rubbing alcohol. Many of these are too harsh for anti fog layers.
- Touching the inside of the lens with bare fingers after cleaning.
- Storing goggles damp in a sealed bag, which traps moisture and residue.
- Applying a fresh anti fog product over a dirty lens, which reduces how evenly it spreads.
FAQ
Can I clean anti fog swim goggles with toothpaste?
It is not recommended. Toothpaste contains abrasives that can scratch the lens and damage the coating. Mild soap and water do the job without that risk.
How often should I clean my swim goggles?
Rinse them after every session and wash with mild soap at least once a week if you swim often. A deeper soak once a month helps remove stubborn oils.
Will cleaning remove the anti fog coating?
Gentle cleaning with mild soap and soft cloths does not usually remove the coating. Harsh chemicals and abrasive rubbing are more likely to cause wear. If fogging persists after cleaning, the coating may be worn and reapplying an anti fog product may help. For more on that, see Anti Fog Coating for Swim Goggles: How It Works and How to Keep Lenses Clear.
Conclusion
Clean your swim goggles after each session with mild soap, cool water and a soft cloth, and avoid anything abrasive. A monthly deep soak keeps oils from building up on the lenses and gaskets. Consistent, gentle care protects the anti fog layer and keeps your pool views clear. For the next step, read How to Remove Anti Fog Coating from Swim Goggles: A Step-by-Step Guide if you ever need to start fresh.
Related reading
- Swim Goggles Anti Fog Spray: How to Use It for Clear Views All Session
- How to Anti Fog Goggles: 7 Steps for Clear Swim, Snow and Safety Views
- TYR Anti Fog Spray for Swim Goggles Review (2026)
- Swimming Goggles Anti-Fog Restorer: How to Restore Clear Lenses in 7 Steps
Ready to choose one?
