We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Homemade Anti Fog for Goggles: 5 Recipes That Actually Work

Learn how to make homemade anti fog for goggles with safe, simple methods. Compare recipes, application steps, and mistakes to avoid for clear swim views.

Homemade anti fog for goggles can keep your lenses clear for a full training session, and you can make it with supplies already in most kitchens. In this guide, you will learn why goggles fog, how to prepare your lenses, two or three simple home methods, and how to apply and test them before a workout. You will also see where homemade options fall short compared with commercial sprays.

Why Goggles Fog in the First Place

Fogging happens when warm, humid air inside the goggle cup meets a cooler lens surface. Water vapor condenses into tiny droplets that scatter light and blur your vision. Your body heat, exhaled breath leaking under the seal, and the temperature difference between your face and the water all speed this up. Lenses with a smooth, clean surface also tend to fog faster because condensation spreads into a film rather than beading.

Shopping for one? See our guide: 7 Best Anti Fogs for Ski Goggles: Expert Picks for Clear Days on the Slopes.

Knowing this helps you choose the right approach. A homemade coating works by leaving a thin layer that lets condensation form an even sheet instead of droplets, or by reducing surface tension so water runs off. Neither method stops fogging entirely, which is why setup and fit matter just as much as the coating itself.

What You Need Before You Start

Gather these items before you mix anything:

  • Two clean microfiber cloths, one for applying and one for buffing
  • A small glass or plastic bowl for mixing
  • A measuring spoon set
  • Cold running water and a bit of unscented liquid dish soap
  • Your chosen homemade ingredient (see the methods below)
  • A small airtight container to store the mixture
  • A pair of goggles you already own, cleaned and inspected for scratches

Step 1: Clean and Prepare the Lenses

Preparation makes the difference between a coating that lasts 20 minutes and one that lasts through an hour of drills. Oils from skin, sunscreen, and pool chemicals all interfere with adhesion.

  1. Rinse the goggles in warm water to remove chlorine or salt.
  2. Add one drop of unscented dish soap to your palm and rub the inside of each lens gently with your fingertips for about 10 seconds.
  3. Rinse thoroughly with cool water until no soap film remains.
  4. Dry the lenses with a clean microfiber cloth. Do not use a towel with lint or a rough paper product.
  5. Inspect the lenses in good light. If there are deep scratches, a homemade coating will not hide them and the goggles may need replacing.

Step 2: Choose a Homemade Method

Several household mixtures are commonly used by swimmers. Results vary by goggle lens material and water temperature, so test one at a time. Here are three widely discussed options.

Method A: Diluted Baby Shampoo

Mix one teaspoon of tear-free baby shampoo with about two cups of water in a bowl. Dip a cloth into the solution, wipe the inside of each lens, and leave a very thin film. Do not rinse. Many swimmers use this as a basic version of the approach. Because it is a soap-based film, it can smear if you apply too much, so use the smallest amount possible.

Method B: Diluted Dish Soap Solution

Combine a few drops of unscented dish soap with roughly one cup of water. Apply it the same way as Method A, then let the lenses air dry for two to three minutes before you put them on. Some people find this produces a slightly more durable film, but excess soap can irritate the eyes, so rinse the lenses lightly once before wearing if you notice stinging.

Method C: Vinegar and Water Rinse

Mix equal parts white vinegar and water. Wipe a thin layer onto a dry, clean lens and let it dry completely before wearing. Vinegar is an acid, so keep it away from your eyes and rinse the goggles well afterward. This approach is more of a surface cleaner than a true anti-fog coating, and it may work better on glass-like lenses than on polycarbonate.

Step 3: Apply the Coating Correctly

Application technique affects results as much as the recipe.

  1. Work in a clean, dry area so dust does not stick to the wet film.
  2. Apply a few drops to a cloth, not directly to the lens. Overly wet coatings run and leave streaks.
  3. Wipe in a single circular motion, covering the full lens surface.
  4. Let the lens air dry for at least two minutes. Buffing too early can remove the film.
  5. Gently buff away any haze with a dry section of the cloth.

Step 4: Test Before Your Session

Never debut a homemade coating in an important practice set. Put the goggles on in the bathroom or a warm room, breathe into them, and check for fog within 30 seconds. Then move to the pool for a short warm-up. If the lenses stay clear through about 10 minutes of swimming, the coating is working. If they cloud early, reapply or try another method next time.

Comparison of Homemade Options

Method Main Ingredients Best For Main Drawback
Diluted baby shampoo Tear-free shampoo, water Short sessions, mild water Can smear with too much product
Diluted dish soap Unscented dish soap, water Frequent reapplication Possible eye irritation if residue remains
Vinegar and water White vinegar, water Cleaning lenses first Acidic; short-lived film on many lenses

Common Mistakes to Avoid

  • Using concentrated soap. A strong mixture leaves residue that smears and stings.
  • Skipping the cleaning step. Oils block the film and cause early fogging.
  • Applying too much liquid. Thick coatings run into your field of view.
  • Wiping with a rough cloth. Microscratches add permanent haze over time.
  • Storing goggles with a wet coating on the lens, which can trap grime.
  • Assuming a homemade mix will match a commercial spray. Results are generally less consistent.

Tips for Better Results

  • Reapply before every session, since most homemade films wear off within an hour.
  • Rinse goggles only with cool water after training, not hot water, to protect seals.
  • Check the fit first. A goggle that leaks at the nose bridge will fog no matter what coating you use.
  • Keep a labeled small container of your mixture so you can track which version works best in your pool.
  • If you swim in very cold open water, a homemade coating is unlikely to match the performance of a dedicated product. Consider a commercial option for those conditions.

When to Choose a Commercial Product Instead

Homemade mixtures are useful for occasional swimmers or as a backup. If you train several days a week, or you race and need dependable clarity, a purpose-built spray designed for swim goggles is usually more predictable. For example, you can read about TYR Anti Fog Spray for Swim Goggles Review (2026) to see how a dedicated product is formulated. For a step-by-step comparison of pool-focused options, Swimming Goggles Anti Fog Spray: How to Stop Fogging in 7 Steps covers application for commercial sprays in detail. If you swim with a specific goggle model, Arena Cobra Ultra Swipe Anti Fog Swim Goggles Review (2026) shows how one popular design handles fogging. Swimmers who want a wider selection can check Anti Fog for Goggles Swimming Best: 6 Options That Actually Work. And for ongoing use between sessions, Swim Goggles Anti Fog Spray: How to Use It for Clear Views All Session explains timing and reapplication.

A few supplies make homemade coatings easier to apply and more consistent. Microfiber cloths avoid lint and scratches, and a dedicated goggle case protects lenses between uses.

  • Microfiber lens cloths: Their soft, dense weave lifts residue without leaving fibers behind. View on Amazon
  • Hard-shell goggle case: Protects lenses from pressure and dust so your coating is not disturbed in your bag. View on Amazon
  • Tear-free baby shampoo: A common, mild base for the diluted method described above. View on Amazon

FAQ

Does homemade anti fog for goggles last a full swim?

Most homemade films last between 20 and 60 minutes, depending on water temperature, lens material, and how well the surface was cleaned. Reapplying halfway through a long set is a sensible habit.

Is baby shampoo safe to put on swim goggles?

Tear-free baby shampoo is generally considered mild, but it is still a soap. Use a very diluted solution, avoid over-application, and rinse lightly if you notice any stinging. If you have a history of eye sensitivity, check with an eye care professional before using any homemade product near your eyes.

Can I use vinegar on all goggle lenses?

Vinegar is acidic and may affect some coatings or lens materials over time. Test on an inconspicuous area first, rinse well after use, and do not let it sit on the lens for long periods.

Why do my goggles fog even after I apply a coating?

The most common reasons are poor seal fit, residual oil on the lens, or applying the film before the lens was fully dry. Check the fit and cleaning steps before changing the recipe.

How often should I reapply a homemade anti fog coating?

Reapply before each session and whenever you notice haze. Frequent swimmers often find that a weekly cleaning and fresh coat keep the lenses more consistent.

Can homemade anti fog damage goggle lenses?

Diluted, mild mixtures are unlikely to cause damage when used sparingly, but acidic or concentrated products may degrade some coatings or plastics over time. Stick to dilute solutions and test first.

Is a homemade coating as good as a commercial spray?

In general, commercial products are formulated for consistency and longer-lasting clarity. Homemade options can be useful for casual swimming or as a backup, but results vary more from session to session.

Should I consult a professional about goggle use?

If you wear goggles for medical reasons, have eye conditions, or notice persistent irritation or vision changes, consult an eye care professional before using any coating.

Conclusion

Homemade anti fog for goggles can give you clearer views for shorter workouts when the lenses are clean, the fit is secure, and the coating is applied in a thin, even layer. Test each method before race day, and keep the mixtures mild to protect your eyes and your lenses. For frequent training or open-water conditions, a dedicated commercial product will usually offer more reliable performance.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our swimming gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Swim Brief.