DIY Anti Fog for Swim Goggles: 5 Home Methods That Work
Learn how to make DIY anti fog for swim goggles at home with baby shampoo, vinegar or a simple spit method, plus tips to keep lenses clear.
Updated November 2026
DIY anti fog for swim goggles is a simple way to keep your lenses clear using ingredients you probably already have. A thin, even film of a mild surfactant stops tiny water droplets from clinging to the inside of the lens and turning cloudy. This guide walks through the home methods swimmers use most, how to apply them, and where each one falls short.
Why Goggles Fog in the First Place
Fogging happens when warm, humid air inside the goggle cup meets a cooler lens surface. Water condenses into thousands of small droplets that scatter light. Commercial anti fog coatings work by reducing surface tension so the moisture spreads into a flat sheet instead. Home methods aim for the same effect with a lighter, less durable layer. For background on how coatings behave, see Anti Fog Coating for Swim Goggles: How It Works and How to Keep Lenses Clear.
Shopping for one? See our guide: 6 Best Swim Goggles Anti Fogs for Clear Pool Views (2026).
Three Home Methods to Try
Baby Shampoo Rub
Mild baby shampoo contains gentle surfactants that leave a thin film on plastic lenses. Put one or two drops on a clean fingertip, rub it across the inside of each lens, then rinse briefly with water. Do not wipe it dry, since the film is what you want to keep.
Diluted White Vinegar Soak
Mix roughly one part white vinegar to four parts water in a small cup. Soak the lenses for about 30 seconds, then let them air dry without rinsing. Vinegar can cut through residue, but it may irritate sensitive eyes if any remains, so rinse your goggles well before you put them on.
The Spit Method
Spit is a fast, no-cost option that many swimmers use in a pinch. Apply a small amount to each lens, spread it with a finger, and rinse. The effect is short-lived and depends on your saliva, so treat it as a backup rather than a long-term fix.
Step-by-Step Application Checklist
- Clean the lenses with mild soap and water to remove oils and dust.
- Dry them with a soft cloth, or let them air dry fully.
- Apply your chosen solution in a thin, even layer, covering the whole inner surface.
- Rinse lightly (except for the vinegar method, which you let dry).
- Let the lenses dry completely before fitting them to your face.
- Test them by breathing on the inside of the lens; a clear finish should show no fog.
| Method | Ingredients | Typical lasting time |
|---|---|---|
| Baby shampoo | Mild baby shampoo, water | Several sessions, depending on wear |
| Vinegar soak | White vinegar, water | Several sessions, depending on wear |
| Spit | Saliva | A single session at most |
Tips and Common Mistakes
- Do not use dish soap or harsh detergents; they can strip lens coatings and irritate skin.
- Avoid rubbing lenses with paper towels, which can leave micro-scratches that trap fog.
- Reapply every few sessions, because home films wear off faster than commercial coatings.
- Always rinse vinegar or any cleaner thoroughly before swimming.
- Store goggles with the strap loose and lenses facing up to avoid pressure marks.
Recommended gear
A soft microfiber cloth helps you clean and dry lenses without scratching them. Choose one labeled for eyewear or lenses. View on Amazon
For a ready-made option, a dedicated swim goggle anti fog spray takes the guesswork out of mixing and applying. Review the instructions on the label before first use. View on Amazon
If you prefer a lasting film without a home mix, a spare pair of goggles with a factory coating can serve as a comparison. View on Amazon
For readers comparing ready-made options, Swim Goggles Anti Fog Spray: How to Use It for Clear Views All Session explains application steps for a commercial product, and DIY Anti Fog Goggles: 4 Home Methods That Work for Swimmers covers more home variations.
FAQ
Does baby shampoo damage goggle lenses?
Mild baby shampoo is generally gentle on plastic lenses when used in small amounts and rinsed. Avoid heavy scrubbing, which can wear the lens surface over time.
How long does a homemade anti fog last?
Most home films last a few sessions before fogging returns. Durability depends on water temperature, how often you wipe the lenses, and how you store them.
Is it safe to use vinegar on goggles?
Diluted white vinegar is commonly used, but make sure every trace is rinsed or fully dried before wearing goggles. If you have eye sensitivity or irritation, check with an eye care professional before trying it.
Conclusion
A thin layer of baby shampoo or a diluted vinegar soak can keep swim goggles clear for a session or more, at little cost. Clean the lenses first, apply a thin even coat, and reapply as needed. Pair your home routine with careful storage and you will get clearer views in the pool.
Related reading
- TYR Anti Fog Spray for Swim Goggles Review (2026)
- How to Remove Anti Fog Coating from Swim Goggles: A Step-by-Step Guide
Ready to choose one?
