We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

DIY Anti Fog Spray for Goggles: 5 Simple Recipes That Work

Learn how to make a DIY anti fog spray for goggles at home, with simple recipes, application steps, and tips to keep your swim or ski goggles clear.

A DIY anti fog spray for goggles is a simple mix of a few household ingredients that coats the inside of your lenses with a thin film, helping water and moisture spread out instead of beading into fog. With a basic recipe, a clean spray bottle, and a few minutes of prep, you can keep your lenses clearer during swim training, open-water sessions, or time on the slopes. This guide walks through how these sprays work, which recipes are most commonly used, how to apply them correctly, and where homemade versions fall short.

How Anti Fog Sprays Work on Goggle Lenses

Fogging happens when warm, humid air inside your goggles hits a cooler lens surface and condenses into thousands of tiny droplets. Those droplets scatter light and blur your view. Anti fog products work by changing how that moisture behaves. Most use a surfactant, a compound that reduces surface tension, so water spreads into an almost invisible sheet instead of separate beads. Some also leave a light hydrophilic film that attracts water and holds it in place.

Shopping for one? See our guide: 7 Best Anti Fog Sprays for Goggles of 2026: Buyer's Guide.

Homemade mixes rely on the same principle, usually with a mild soap or a thin layer of a sugar- or alcohol-based solution. Results vary a lot from one lens material to another, so it helps to understand what you are working with before mixing anything.

Why Goggle Lenses Fog Differently

  • Polycarbonate lenses are common in swim and ski goggles and tend to hold a coating well, but they can also pick up scratches that trap moisture.
  • Coated or tinted lenses may react unpredictably to some homemade ingredients, especially alcohol-heavy mixes.
  • Silicone gaskets and seals can trap warm breath and push condensation onto the lens, so a good lens coating alone may not solve the problem.

Ingredients and Tools You Need

Most DIY recipes use only a few common items. Gather them before you start so you can test a small batch on one lens first.

  1. A clean glass or plastic spray bottle, 2 to 4 ounces, with a fine mist nozzle.
  2. Distilled water, which avoids mineral residue that can cloud lenses.
  3. One of the base ingredients listed in the recipes below (baby shampoo, dish soap, or isopropyl alcohol).
  4. Soft microfiber cloths, not paper towels, for cleaning and buffing.
  5. Rubbing alcohol, if you plan to clean lenses before application.
  6. A small funnel or dropper for measuring soap accurately.

5 DIY Anti Fog Spray Recipes for Goggles

Each recipe below is a starting point. Start with the smallest amount of soap you can, because too much leaves streaks and can irritate your eyes if it stays on the lens.

Recipe 1: Baby Shampoo Mix

Combine one teaspoon of tear-free baby shampoo with about two cups of distilled water in a spray bottle. Shake gently until the solution is evenly mixed. This is one of the most widely discussed homemade options among swimmers, largely because the mild surfactant is gentle around the eyes.

Recipe 2: Dish Soap Mix

Mix a few drops of a mild, unscented dish soap into a 2-ounce bottle of distilled water. Use only a drop or two. Too much soap is the most common reason homemade sprays leave a film that smears.

Recipe 3: Diluted Isopropyl Alcohol

Combine equal parts isopropyl alcohol and distilled water. Alcohol evaporates quickly and can leave a thin residue that discourages condensation. Some users report that this mix works well on uncoated lenses but can strip coatings over time, so test it sparingly.

Recipe 4: Vinegar and Water Rinse

Mix one part white vinegar with four parts distilled water. This is more of a cleaning rinse than a true anti fog agent, but some people use it to remove mineral deposits that make fogging worse. Rinse thoroughly after use and avoid using it on lenses with specialty coatings.

Recipe 5: Glycerin Blend

Add a single drop of glycerin to two ounces of distilled water and shake well. Glycerin is a humectant that can attract and hold a thin water film. Use very sparingly, because excess glycerin can smear and leave a tacky feel.

How to Apply DIY Anti Fog Spray Correctly

Application matters as much as the recipe. Even a good mix will fail if the lens is dirty or the coating is too heavy.

Step-by-Step Application

  1. Clean the lens. Rinse the goggles in fresh water, then wipe each lens with a clean microfiber cloth. Remove any oils, sunscreen, or residue.
  2. Let the lens dry. Air dry or wipe gently. Any leftover water will dilute your solution.
  3. Apply a light mist. Spray one to two short pumps onto each lens interior. Do not soak the lens.
  4. Spread the film. Use a fingertip or a clean cloth to work the solution across the entire lens in thin, even strokes.
  5. Buff dry. Wipe away any excess until the lens looks clear and no visible streaks remain.
  6. Rinse before wearing. In the pool, a brief rinse removes loose residue while leaving a thin protective layer. For skiing or cycling, skip the rinse and simply let the coating dry fully.

How Often to Reapply

Most homemade coatings last between one and several sessions, depending on water temperature, how often you wipe the lens, and whether you use a hard water rinse. Many users reapply before every session, while others find that a weekly application is enough if they store goggles properly. Watch for early signs of fogging, such as small beads forming near the edges, and reapply when you notice them.

Common Mistakes to Avoid

  • Using too much soap. A heavy film causes smearing and can sting your eyes.
  • Applying to dirty lenses. Oils and sunscreen block the film from bonding evenly.
  • Skipping the buff step. Leftover liquid pooling in the corners will fog first.
  • Using tap water. Minerals leave a cloudy haze that is hard to remove.
  • Storing goggles wet. Trapped moisture accelerates fogging and can degrade gaskets.
  • Using alcohol on coated lenses. Some coatings can be damaged by high alcohol content over repeated use.

Tips for Better Results

  • Test any new recipe on one lens before treating both, and wait a full session to judge the result.
  • Store goggles in a hard case with the lenses facing up and a small amount of air circulation.
  • Rinse goggles in cool fresh water after each session to remove chlorine or salt, which can build up on the lens.
  • Keep a labeled bottle for each recipe so you can compare results over time.
  • If your goggles fog heavily even after treatment, check whether the gasket fits snugly against your face, since leaks often cause more fogging than the lens itself.

A few supplies make homemade sprays easier to apply and more consistent from session to session.

  • Soft microfiber cleaning cloths: Lint-free cloths let you spread and buff the solution without scratching the lens surface. View on Amazon
  • Fine mist spray bottles, 2 to 4 ounces: A fine nozzle delivers a light, even coat that is easier to control than a stream. View on Amazon
  • Distilled water: Using distilled water prevents mineral spots that can cloud lenses over time. View on Amazon
  • Tear-free baby shampoo: A gentle surfactant base for the most common homemade recipe. View on Amazon

FAQ

Is DIY anti fog spray safe for my eyes?

Mild ingredients such as tear-free baby shampoo are generally considered gentle, but rinse the lens well and avoid getting solution directly in your eyes. If you have eye sensitivities or an existing condition, consult an eye care professional before using homemade products.

Which DIY recipe works best for swim goggles?

The baby shampoo mix is the most commonly reported option for swim goggles because it is mild and leaves a relatively consistent film. Results depend on your lens type and water conditions, so test before relying on it.

Can I use DIY spray on ski goggles?

Yes, though many skiers prefer a commercial product because cold, dry conditions change how a homemade film behaves. Apply a thin coat, buff thoroughly, and skip any rinse so the film stays on the lens.

How long does a homemade anti fog coating last?

Duration varies widely. Some users get a few sessions, while others need to reapply before every use. Check the lens for early beading and reapply when fogging begins.

Will DIY spray damage my goggle lenses?

It can, particularly if you use high concentrations of alcohol or vinegar on coated lenses. Start with the mildest recipe, test on one lens, and avoid frequent use of harsh mixes.

Do I need to rinse goggles after applying the spray?

For swimming, a brief rinse in fresh water removes loose residue. For dry-use situations like skiing, skip the rinse and let the film set.

Why do my goggles still fog after I apply the spray?

Common causes include a dirty lens, too much or too little solution, a loose gasket that lets warm air in, or a coating that has worn off. Clean the lens thoroughly and check the seal before blaming the recipe.

Is homemade spray better than a store-bought product?

It depends on your priorities. Homemade options are simple and inexpensive to make, but commercial products are formulated for consistency and tested on a range of lens materials. Many people use both, depending on the activity.

Conclusion

A DIY anti fog spray for goggles can keep your lenses clear with a few basic ingredients and careful application. Start with a mild recipe, clean the lens well, and apply only a thin coat. Test on one lens before committing, and watch how your goggles respond over several sessions. With the right approach, homemade sprays can be a practical option for swimmers and other goggle users.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our swimming gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Swim Brief.