We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Make Anti Fog Spray for Goggles: 5 Simple Steps for Clear Views

Learn how to make anti fog spray for goggles at home with a simple mix and application method. Get clear pool and open-water views from the first stroke.

Updated November 2026

Learning how to make anti fog spray for goggles at home takes about five minutes and a few basic ingredients. You will mix a simple solution, apply it correctly, and get lenses that stay clear through a full training session. The method below covers the ingredients, the mixing ratio, and how to apply the spray so it actually works.

What You Need Before You Start

Homemade anti fog spray works by leaving a thin film on the lens that keeps condensation from forming droplets. Most home recipes use a mild liquid soap or baby shampoo as the active agent. Gather these supplies first:

Shopping for one? See our guide: 7 Best Anti Fog Sprays for Goggles Compared (2026).

  • A clean, empty spray bottle (small, roughly 2 to 4 ounces, with a fine mist nozzle)
  • Distilled or boiled water that has cooled to room temperature
  • A few drops of tear-free baby shampoo or a mild, fragrance-free liquid soap
  • Soft microfiber cloths for cleaning and buffing
  • Your goggles, with the lenses fully clean and dry

How to Mix the Solution

Use a ratio of roughly one drop of baby shampoo to one tablespoon of water. Fill the bottle with water first, then add the soap so you do not create a thick foam. Shake gently, and do not overfill. A solution that is too concentrated leaves a smear that blurs your vision, so stick close to the ratio. Make only what you need for a few weeks, since homemade mixes lose effectiveness over time and can grow bacteria if left sitting in a warm gym bag.

How to Apply the Spray to Your Goggles

Application matters as much as the recipe. Follow these steps:

  1. Clean the lenses with a drop of soap and water, rinse thoroughly, and let them air dry.
  2. Spray a light mist onto the inside of each lens. Two or three short pulses per lens is usually enough.
  3. Spread the solution evenly with a fingertip or a clean microfiber cloth. Cover the entire lens surface, including the edges.
  4. Let the coating dry for about 30 seconds. Do not wipe it off.
  5. Rinse the goggles briefly in water before putting them on, so the surface feels smooth rather than slippery.

Factors That Affect How Long the Coating Lasts

Several conditions change how well your homemade coating performs. Water temperature has a large effect, since warmer water and faster exertion create more fogging. Chlorine and oils from skin can also break down the film over time. Reapplying before each session and storing your goggles in a case instead of a hot car will extend the results.

Condition What to Do
Warm pool water Rinse goggles in cool water before each use
Long training sets Reapply the spray halfway through the session if needed
Oily or greasy skin Wash your face before swimming to reduce residue on the lenses
Hot storage Keep goggles in a shaded bag, away from car dashboards

Common Mistakes and Tips

  • Using too much soap, which leaves streaks and blur.
  • Applying to dirty lenses, which traps oils under the coating.
  • Wiping the coating off after it dries, which removes the protective film.
  • Storing the mix for months, since homemade solutions lose strength.
  • Skipping the rinse, which can leave a slippery feel that affects seal and comfort.

If you want to compare this method with commercial options, read Swimming Goggles Anti Fog Spray: How to Stop Fogging in 7 Steps for a broader overview. For lenses that have already lost their coating, How to Fix Anti Fog Goggles: 6 Steps to Clear Lenses Again explains the repair process.

  • Anti-fog swim goggles with a factory coating help because the lens already resists fogging, which reduces how often you need to reapply anything. View on Amazon
  • Soft microfiber cleaning cloths help because they clean and buff lenses without scratching the surface. View on Amazon
  • Small fine-mist spray bottles help because they distribute solution evenly and keep your mix portable. View on Amazon

FAQ

How do you make anti fog spray for goggles without special products?

Mix one drop of tear-free baby shampoo into about one tablespoon of distilled water in a clean spray bottle. Apply a light mist to clean, dry lenses and spread it evenly before letting it dry.

How often should I reapply homemade anti fog spray?

Reapply before each swim session, and again during long workouts if you notice fogging returning. Fresh applications work better than relying on a coating from an earlier day.

Can homemade anti fog spray damage goggle lenses?

Mild soap in small amounts is generally safe for most swim goggle lenses, but harsh detergents or heavy concentrations can cause haze or surface damage. If you are unsure about a specific lens material, check the manufacturer’s care instructions.

Conclusion

A simple mix of diluted baby shampoo and water, applied to clean lenses, gives you a practical anti fog spray for goggles. Keep the ratio light, apply evenly, and reapply before each session for the best results. With a little consistency, you can keep your lenses clear through every set.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our swimming gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Swim Brief.