We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Build a Fence With a Kickboard: A Step-by-Step Guide for Pool Training

Learn how to build a fence with a kickboard for pool training, including the materials, setup steps and common mistakes to avoid for better swim drills.

Updated November 2026

Building a fence with a kickboard means arranging several kickboards in a line so they act as a visual and physical barrier in the water. Swimmers use this setup to practice kicking in a lane, to separate working zones in a shared pool, or to mark out a drill area for a group. This guide covers what you need, how to set the boards up, and what to watch for once they are in the water.

What You Need Before You Start

Most kickboard fences use standard swim training boards, so you may already have what you need. Before you start, confirm that every board is the same size and color if you want a clean line, and check that none are cracked or waterlogged.

Shopping for one? See our guide: Micro Kickboard 3 Wheel Scooter: 5 Best Picks for Kids and Adults (2026).

  • Four to eight kickboards of matching size, depending on how long the fence needs to be
  • A pool lane rope or a flat surface at the pool edge to anchor against
  • Zip ties or a short length of cord if your boards need to stay connected in choppy water
  • A tape measure or pace count to set even spacing

Step-by-Step Setup in the Pool

Start at one end of the lane and work toward the other. Keeping the boards in a straight line is much easier if you use the lane markings on the pool floor as a guide.

  1. Lay the first board flat on the water at the starting point, with the long edge parallel to the lane.
  2. Place the next board about 12 to 18 inches from the first, so swimmers have room to pass without hitting the edge of a board.
  3. Repeat until the fence reaches the length you want. Four to six boards is usually enough for a single drill lane.
  4. Check the line by sighting along the top edges. Adjust any board that sits higher or lower than its neighbors.
  5. If the water is moving, connect the boards with cord or zip ties through the handle holes so they do not drift apart.

Spacing and Placement Tips for Different Drills

The right spacing depends on what you want the fence to do. A tight fence of boards set 12 inches apart works well for narrow lane drills where swimmers need to stay in a single track. A looser fence of 18 inches or more suits group kick sets, where swimmers pass each other at intervals.

Purpose Suggested spacing Number of boards
Narrow lane drill About 12 inches 4 to 6
Group kick set About 18 inches 6 to 8
Shared-lane divider Full lane width, anchored at both ends As needed

Common Mistakes to Avoid

  • Mixing board sizes, which makes the line look uneven and can confuse swimmers judging distance.
  • Setting the boards too close together, so swimmers bump into them during kick turns.
  • Leaving boards loose in moving water, which lets the fence drift into the lane.
  • Forgetting to remove boards after the set, which can create a hazard for other swimmers.

A standard training kickboard is the core piece here, and matching boards from the same line keep the fence uniform. For a more secure line in moving water, a set of simple zip ties rated for wet use helps. Swimmers who want to plan their drill sets around a fence can also look at a pull buoy to use alongside the boards in a separate lane.

  • A uniform set of training kickboards, so every board sits at the same height and spacing.
  • Heavy-duty zip ties made for pool and marine use, for keeping boards connected in current. View on Amazon

If you want more background on how kickboards fit into a training plan, see Does Kickboard Help in Swimming? How It Builds Your Kick (2026) and Swimming Exercises With Kickboard: A Step-by-Step Guide for Pool Training. For drill ideas that use a fence layout, Swimming Workouts With Kickboard: 6 Drills for Stronger Legs offers several starting points.

FAQ

How many kickboards do I need to build a fence?

Four to six boards is enough for a single drill lane, while group kick sets often use six to eight. Start with fewer boards and add more if the line needs to be longer.

Can I build a kickboard fence in an open-water setting?

Kickboards are designed for pool use and are not a substitute for marked open-water buoys. Open-water training needs equipment built for current and visibility, so check local rules before setting anything up.

Will a kickboard fence stay in place if the pool is busy?

Boards can shift when other swimmers pass through them. Connecting them with cord or zip ties and checking the line between sets keeps the fence stable.

Conclusion

A kickboard fence is a simple way to shape a drill lane using gear you likely already own. Match your boards, space them to suit the drill, and secure the line when the water moves. Check the setup between sets so the fence stays straight and safe for everyone in the pool.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our swimming gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Swim Brief.