How to Clean Anti-Fog Swimming Goggles Without Ruining the Coating
Learn how to clean anti-fog swimming goggles without stripping the coating. Simple steps, safe materials, and mistakes to avoid for clear pool and open-water vi
Updated November 2026
To clean anti-fog swimming goggles, rinse them with fresh water, wash the lenses with a mild soap or a dedicated goggle cleaner, and dry them with a soft cloth without rubbing hard. Done this way, you remove chlorine, sunscreen and body oils that break down the anti-fog coating. The result is lenses that stay clear for longer, with less need for re-treatment.
Why Cleaning Affects Anti-Fog Performance
Most anti-fog goggles use a thin coating or an internal treatment that lets condensation spread into an even film instead of tiny droplets. Oils from skin and sunscreen, along with pool chemicals, coat that surface and make it fog again. Scrubbing or using harsh cleaners wears the coating away faster. Gentle, regular cleaning keeps the surface working as intended.
Shopping for one? See our guide: 6 Best Women's Anti Fog Swimming Goggles for Clear Pool Training (2026).
Step-by-Step: Cleaning Anti-Fog Goggles
- Rinse the goggles in cool, fresh water right after your session. Chlorine and salt dry onto the lens and gradually damage the coating.
- Remove the strap and gently pull the goggles apart at the nose bridge only if the design allows it. Otherwise, clean the goggles assembled.
- Put a drop of mild liquid soap or baby shampoo on your fingertips and rub each lens lightly, using a circular motion for about 10 seconds per side.
- Rinse thoroughly under lukewarm water until no soap residue remains. Residue itself can cause fogging.
- Wipe the lenses with a soft microfiber cloth, patting rather than dragging.
- Air-dry the goggles, lenses facing down, on a clean towel away from direct sun or heat.
- Store them in a protective case so the lens surface is not scratched.
Choosing the Right Cleaner
Mild soap, baby shampoo and products labeled as goggle cleaners are the safest choices for most anti-fog lenses. Avoid alcohol-based cleaners, acetone, toothpaste and abrasive scrubs, which can cloud or strip the coating. Many manufacturers specify a particular cleaning method in the product instructions, so check those first. If in doubt, follow the manufacturer’s guidance rather than a general tip.
When to Re-Apply or Restore the Coating
Cleaning removes buildup, but it will not restore a coating that has worn off. If the lenses still fog immediately after a thorough wash and dry, the anti-fog layer may be depleted. Many swimmers then turn to a restorer or spray made for that purpose. Read the product directions closely, since some sprays are designed for new goggles and others for lenses that have already been cleaned.
For a deeper look at restoring lens performance, see Swimming Goggles Anti-Fog Restorer: How to Restore Clear Lenses in 7 Steps. If you want to understand the difference between application methods, Anti Fog Coating for Swim Goggles: How It Works and How to Keep Lenses Clear explains how the coating functions. For a deeper look, How to Clean Deck Shoes: A Step-by-Step Guide for Salt-Stained Pairs covers this in detail.
Common Mistakes to Avoid
- Wiping lenses with a dry towel or your fingers while they are dirty, which grinds grit into the surface.
- Using toothpaste or household glass cleaner, both of which can cloud the lens.
- Leaving goggles in a hot car or in direct sun, which can warp the seal and degrade the coating.
- Skipping the rinse after soap, leaving a film that encourages fogging.
- Touching the inside of the lenses before a session, which transfers oils onto the coating.
Recommended Gear
A few simple supplies make cleaning easier and safer for the lenses.
- Microfiber cloth: soft fibers lift residue without scratching, and a dedicated cloth prevents cross-contamination from other gear. View on Amazon
- Goggle storage case: a hard or padded case keeps the lenses from rubbing against bags and pool deck surfaces. View on Amazon
- Mild goggle cleaner: formulated to remove chlorine and oil without harsh solvents, which suits most anti-fog lenses. View on Amazon
FAQ
Can I use dish soap on anti-fog goggles?
A small amount of mild dish soap is generally fine if it is rinsed off completely. Avoid degreasing formulas, since they can strip the coating more aggressively.
How often should I clean my goggles?
Rinse them after every session and wash them with soap every few sessions or whenever you notice residue. Regular light cleaning does more to preserve the coating than occasional deep cleaning.
Why do my goggles still fog after cleaning?
The anti-fog layer may have worn off, or residue may remain from soap or sunscreen. Rinse again thoroughly and dry the lenses fully; if fogging continues, a restorer or a new pair may be needed.
Conclusion
Cleaning anti-fog swimming goggles is quick when you rinse after each session and use mild, residue-free products. Gentle handling and proper storage protect the coating far longer than any single fix. Start with these habits, and reach for a restorer only when the lenses still fog after a clean wash.
Related reading
- Swimming Goggles Anti Fog Spray: How to Stop Fogging in 7 Steps
- Does Anti Fog Spray for Swimming Goggles Decathlon Work? How to Use It
Ready to choose one?
