How to Make Anti Fog Solution for Swim Goggles: 5 Simple Steps (2026)
Learn how to make anti fog solution for swim goggles at home with a few common ingredients, plus application tips to keep lenses clear through your whole sessio
Updated November 2026
To make an anti fog solution for swim goggles at home, you mix a small amount of mild, fragrance-free liquid soap or baby shampoo with water, then coat the inside of the lenses and rinse. The result is a thin film that reduces the tiny water droplets that cause fogging. Homemade versions are not as long-lasting as commercial sprays, but they work well for short sessions and cost almost nothing to prepare.
What You Need to Make a Homemade Anti Fog Solution
Keep the ingredient list short. The fewer additives, the less risk of irritating your eyes or damaging the lens coating.
Shopping for one? See our guide: 6 Best Swim Goggles Anti Fogs for Clear Pool Views (2026).
- A clean 2-ounce or similar small bottle with a flip or squeeze cap
- One to two drops of mild, fragrance-free liquid soap or baby shampoo
- Roughly 1 tablespoon of clean water (distilled or tap, as long as it is clear)
- A soft microfiber cloth or lint-free cotton pad
- Access to a sink for a final rinse
Step-by-Step: Mixing and Applying the Solution
- Mix the solution. Add one drop of soap to the bottle, then fill it with about one tablespoon of water. Cap it and swirl gently. Avoid shaking hard, which creates suds that are hard to spread evenly.
- Clean the lenses first. Rinse the goggles in fresh water to remove oils, sunscreen or chlorine residue. Oils are the most common reason an anti fog layer fails.
- Apply a few drops. Place a drop or two inside each lens. Spread it with a fingertip or the cloth so the entire inner surface is covered.
- Let it sit briefly. Wait about 10 to 15 seconds so the film can bond to the lens.
- Rinse and dry. Rinse the lenses under cool running water to remove excess soap. Shake off the water and let the goggles air dry or wipe them with the cloth. Do not rub hard, since that can scratch the lens.
How Long the Film Lasts and When to Reapply
A soap-based film usually lasts a single session, sometimes longer in cooler water. Water temperature, how often you adjust the strap and whether you wear the goggles in a hot shower all affect how quickly fogging returns. Owners often report that reapplying before each swim, rather than trying to stretch one application across several workouts, gives more consistent results.
Tips and Common Mistakes
- Use only a tiny amount of soap. Too much leaves a streaky film that blurs vision.
- Never use shampoo with conditioners, fragrances or essential oils, which can sting and may degrade the lens.
- Do not skip the cleaning step. Lenses coated with sunscreen or lotion will fog no matter what you apply.
- Store the mixed solution in a cool place and make a fresh batch every few days, since water-based mixtures can grow bacteria.
- Stop using the mix if you notice stinging, redness or blurred lenses that will not clear. Consult an eye care professional if irritation persists.
Recommended Gear
If you prefer a ready-made option or want something that lasts longer than a homemade mix, a dedicated anti fog product is a practical alternative. Check the label for swim-specific formulas.
- Swim goggles anti fog spray: A purpose-built spray is designed for lens coatings and tends to hold up better than soap in warm pool water. View on Amazon
- Microfiber lens cloth: A soft cloth spreads the solution evenly and helps you avoid scratching the lenses. View on Amazon
For more options and comparisons, see Swim Goggles Anti Fog Spray: How to Use It for Clear Views All Session and Anti Fog Solution for Goggles: 7 Steps to Clear Swim Views (2026). If you already use a coating and it is wearing off, How to Remove Anti Fog Coating from Swim Goggles: A Step-by-Step Guide explains how to strip it before reapplying.
FAQ
Is baby shampoo a good anti fog solution for swim goggles?
Yes, when it is a plain, fragrance-free formula used in small amounts. It leaves a thin film that reduces fogging for a single session. Avoid versions with added scents or conditioners.
Can I use toothpaste or dish soap instead?
Toothpaste is abrasive and can scratch lenses, so it is not recommended. Dish soap can work in a pinch but is harsher on skin and eyes, so a mild liquid soap is the safer choice.
How often should I reapply a homemade solution?
Reapply before each swim, and again if the lenses start to fog mid-session. Homemade mixes generally do not last through multiple workouts the way commercial sprays may.
Conclusion
A simple mix of one drop of mild soap and about a tablespoon of water can keep swim goggles clear for a workout. The key steps are cleaning the lenses thoroughly, applying a thin layer and rinsing well. If you swim often or need longer-lasting clarity, a dedicated anti fog product may be worth trying alongside your homemade mix.
Ready to choose one?
