We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

DIY Anti Fog for Swim Goggles: 5 Home Methods That Work

Learn how to make DIY anti fog for swim goggles at home with baby shampoo, vinegar or a simple spit method, plus tips to keep lenses clear.

Updated November 2026

DIY anti fog for swim goggles is a simple way to keep your lenses clear using ingredients you probably already have. A thin, even film of a mild surfactant stops tiny water droplets from clinging to the inside of the lens and turning cloudy. This guide walks through the home methods swimmers use most, how to apply them, and where each one falls short.

Why Goggles Fog in the First Place

Fogging happens when warm, humid air inside the goggle cup meets a cooler lens surface. Water condenses into thousands of small droplets that scatter light. Commercial anti fog coatings work by reducing surface tension so the moisture spreads into a flat sheet instead. Home methods aim for the same effect with a lighter, less durable layer. For background on how coatings behave, see Anti Fog Coating for Swim Goggles: How It Works and How to Keep Lenses Clear.

Shopping for one? See our guide: 6 Best Swim Goggles Anti Fogs for Clear Pool Views (2026).

Three Home Methods to Try

Baby Shampoo Rub

Mild baby shampoo contains gentle surfactants that leave a thin film on plastic lenses. Put one or two drops on a clean fingertip, rub it across the inside of each lens, then rinse briefly with water. Do not wipe it dry, since the film is what you want to keep.

Diluted White Vinegar Soak

Mix roughly one part white vinegar to four parts water in a small cup. Soak the lenses for about 30 seconds, then let them air dry without rinsing. Vinegar can cut through residue, but it may irritate sensitive eyes if any remains, so rinse your goggles well before you put them on.

The Spit Method

Spit is a fast, no-cost option that many swimmers use in a pinch. Apply a small amount to each lens, spread it with a finger, and rinse. The effect is short-lived and depends on your saliva, so treat it as a backup rather than a long-term fix.

Step-by-Step Application Checklist

  1. Clean the lenses with mild soap and water to remove oils and dust.
  2. Dry them with a soft cloth, or let them air dry fully.
  3. Apply your chosen solution in a thin, even layer, covering the whole inner surface.
  4. Rinse lightly (except for the vinegar method, which you let dry).
  5. Let the lenses dry completely before fitting them to your face.
  6. Test them by breathing on the inside of the lens; a clear finish should show no fog.
Method Ingredients Typical lasting time
Baby shampoo Mild baby shampoo, water Several sessions, depending on wear
Vinegar soak White vinegar, water Several sessions, depending on wear
Spit Saliva A single session at most

Tips and Common Mistakes

  • Do not use dish soap or harsh detergents; they can strip lens coatings and irritate skin.
  • Avoid rubbing lenses with paper towels, which can leave micro-scratches that trap fog.
  • Reapply every few sessions, because home films wear off faster than commercial coatings.
  • Always rinse vinegar or any cleaner thoroughly before swimming.
  • Store goggles with the strap loose and lenses facing up to avoid pressure marks.

A soft microfiber cloth helps you clean and dry lenses without scratching them. Choose one labeled for eyewear or lenses. View on Amazon

For a ready-made option, a dedicated swim goggle anti fog spray takes the guesswork out of mixing and applying. Review the instructions on the label before first use. View on Amazon

If you prefer a lasting film without a home mix, a spare pair of goggles with a factory coating can serve as a comparison. View on Amazon

For readers comparing ready-made options, Swim Goggles Anti Fog Spray: How to Use It for Clear Views All Session explains application steps for a commercial product, and DIY Anti Fog Goggles: 4 Home Methods That Work for Swimmers covers more home variations.

FAQ

Does baby shampoo damage goggle lenses?

Mild baby shampoo is generally gentle on plastic lenses when used in small amounts and rinsed. Avoid heavy scrubbing, which can wear the lens surface over time.

How long does a homemade anti fog last?

Most home films last a few sessions before fogging returns. Durability depends on water temperature, how often you wipe the lenses, and how you store them.

Is it safe to use vinegar on goggles?

Diluted white vinegar is commonly used, but make sure every trace is rinsed or fully dried before wearing goggles. If you have eye sensitivity or irritation, check with an eye care professional before trying it.

Conclusion

A thin layer of baby shampoo or a diluted vinegar soak can keep swim goggles clear for a session or more, at little cost. Clean the lenses first, apply a thin even coat, and reapply as needed. Pair your home routine with careful storage and you will get clearer views in the pool.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our swimming gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Swim Brief.