We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Clean Anti Fog Goggles Without Ruining the Coating: 6 Steps

Learn how to clean anti fog goggles safely in 6 steps, keeping the coating intact so your lenses stay clear in the pool, on the slopes or outdoors.

Updated November 2026

Learning how to clean anti fog goggles properly keeps the lens coating working and your view sharp. The process takes about five minutes: rinse off salt, chlorine and oils, wash with a mild soap, dry with a soft cloth and store them correctly. Skipping the wrong products is just as important, because harsh cleaners strip the coating faster than normal use does.

Why Cleaning Method Matters for Anti Fog Coatings

Most anti fog treatments are a thin hydrophilic layer that spreads condensation into a sheet instead of tiny droplets. Oils from skin, sunscreen residue and abrasive dust can break that layer down. Manufacturers generally advise against alcohol, ammonia-based glass cleaners and paper towels, since these can dull or remove the coating. A gentle routine protects the treatment longer.

Shopping for one? See our guide: 7 Best Anti Fogs for Ski Goggles: Expert Picks for Clear Days on the Slopes.

Step-by-Step Cleaning Process

  1. Rinse immediately after use. Use lukewarm fresh water to flush away chlorine, salt or sand. Do not rub the lenses while they are dry and gritty.
  2. Wash with a mild, fragrance-free soap. A drop of baby shampoo or dish soap works well. Gently wash the lens with your fingertips, paying attention to the inside surface and the nose bridge area.
  3. Rinse thoroughly. Make sure no soap film remains, since residue can cause streaking and fogging.
  4. Pat dry with a microfiber cloth. Blot instead of wiping in circles. Microfiber is soft enough that it will not scratch the surface.
  5. Air dry the strap and frame. Let the strap hang loose so the silicone or rubber does not stay damp and degrade.
  6. Store in a hard case or pouch. Keep them away from direct sun and heat, which can warp the frame and affect the seal.

Products and Surfaces to Avoid

Certain cleaners look harmless but cause problems over time. Use this quick reference before you reach for something new.

Item Why to avoid it
Alcohol or acetone Can dissolve the anti fog layer and damage plastic lenses
Paper towels or tissues Leave fibers and can scratch the coating
Glass cleaner with ammonia Strips hydrophilic coatings
Hot water above roughly body temperature Can warp frames and weaken seals

Restoring Clarity After Cleaning

If fogging returns after a proper wash, the coating may be worn rather than dirty. Some swimmers use a dedicated restorer, which is covered in detail in Swimming Goggles Anti-Fog Restorer: How to Restore Clear Lenses in 7 Steps. For ongoing care between sessions, Swimming Goggles Anti Fog Spray: How to Stop Fogging in 7 Steps explains how to reapply treatment safely. Snow and ski users face different conditions, so Ski Goggles Anti Fog: How to Stop Fogging on the Slopes (Step-by-Step) is worth reading as well.

  • Microfiber lens cloth: A soft, lint-free cloth lets you dry lenses without leaving scratches or fibers. View on Amazon
  • Mild fragrance-free soap: Baby shampoo or a gentle liquid cleanser cleans without stripping the coating. View on Amazon
  • Hard protective case: A rigid case prevents lens pressure and keeps the coating from being rubbed during transport. View on Amazon

Common Mistakes and Tips

  • Wiping the lens while it is dry and gritty, which causes micro-scratches.
  • Using saliva to clear fog, since residue can make the problem worse.
  • Storing goggles in a hot car or on a sunny deck.
  • Cleaning with a soap that contains moisturizers or oils.
  • Testing new cleaners on the full lens before checking a small corner first.

FAQ

Can I use dish soap to clean anti fog goggles?

Yes, a small amount of mild, unscented dish soap usually works. Rinse it fully so no film is left, since residue can cause fogging.

How often should I clean anti fog goggles?

Rinse them after every session and wash them with mild soap at least once a week if you use them often. Heavy sunscreen or oily residue may call for more frequent washing.

Will cleaning remove the anti fog coating?

Gentle cleaning with mild soap and a soft cloth generally preserves the coating. Harsh chemicals and abrasive wiping are the main causes of premature loss, so consult the manufacturer’s care instructions if you are unsure.

Conclusion

Cleaning anti fog goggles is simple when you rinse early, use mild soap and dry gently. Avoid alcohol, paper towels and hot water to protect the coating. With consistent care, your lenses will stay clear for much longer.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our swimming gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Swim Brief.